Im going to show you how to re-fill your smokeless cigarette atomizer A.K.A an tankomizer. First of all, let’s begin with the electric cigarette clearomizer itself. If you notice on the electric cigarette clearomizer, on top of theirs a silicon bun. Underneath the tiny hole there’s a coil. That’s the hole were going to be using to fill the electric cigarette clearomizer up, use a blunt needle to fill the bottle. There is a small hole & you can see half way down. It was poked using the blunt needles.

Take the needle off of the bottle and grab your particular E-juice flavor, Do away with the lid on your E juice. Simply remove the cap off of that. Take the lid and screw the blunt filling needle on tight and nice to avert any leaks.

Then next step is to grab your smokeless cigarette clearomizer & insert it firmly in the hole. Making sure you thrust through the silicone to make a hole to fill. Next lets just drip some dropping’s of E-juice in our bottle. Be certain your E juice runs in it. It absorbs by the wick hanging down on either side. This grabs the E juice up into the coil then your vapor is produced by your electronic cigarette. That is very simple, pop the needle out. The silicone hole underneath the big hole at the top actually seals itself because it’s elastic. Some of these are equipped with a tiny rubber bun. If you can exchange them then go ahead & do it.

This is how you refill your vapor cigarette tankomizer. Then you’ll want to grab the protective sleeve and slide it over the clearomizer. You can see how much E juice you have left inside that little window. Then, you push that sleeve down steadily to hold it in its place. Thats it, your finished.